Deformation of the shaft in torsion and the effect of torsion along with bending

Deformation of the shaft in torsion and the effect of torsion along with bending

Авторы

  • Avazbek Obidov Namangan institute of engineering and technology
  • Asilbek Mirzaumidov Namangan institute of engineering and technology
  • Axrorbek Abdurasulov Namangan institute of engineering and technology
  • Doniyorjon Otaqoʻziyev Tashkent State Transport University

DOI:

https://doi.org/10.61151/stjniet.v9i2.487

Ключевые слова:

shaft, singularity, bending vibrations, saw cylinder, slack, technological slot

Аннотация

Insufficient smoothness of the saw cylinder shaft leads to impermissible misalignments in the gap between the columns, which has a very negative effect on the grinding process. In this case, using the method of equivalent diameters developed by B.P. Jemochkin, we determine the bending and turning angles of the saw cylinder shaft.

Загрузки

Опубликован

2024-06-29

Как цитировать

Obidov, A., Mirzaumidov , A., Abdurasulov , A., & Otaqoʻziyev , D. (2024). Deformation of the shaft in torsion and the effect of torsion along with bending. Scientific and Technical Journal of Namangan Institute of Engineering and Technology, 9(2), 208–216. https://doi.org/10.61151/stjniet.v9i2.487

Выпуск

Том 9 № 2 (2024): Scientific and Technical Journal of Namangan Institute of Engineering and Technology

Раздел

Articles