Vol. 8 No. 1 (2023): Scientific and Technical Journal of Namangan Institute of Engineering and Technology

View Vol. 8 No. 1 (2023): Scientific and Technical Journal of Namangan Institute of Engineering and Technology

DOI: https://doi.org/10.61151/stjniet.v8i1

Published: 2023-03-31

ANALYSIS OF LOAD CHANGES IN THE CHAIN DRIVE DURING THE DRYING PROCESS OF COTTON FALLING FROM THE LONGITUDINAL SHELVES OF THE DRUM

KHURSHID YULDASHEV

3-8
- 3-8
INFLUENCE AND CHARACTERISTICS OF DRYING MECHANISMS IN LEATHER PRODUCTION ON THE DERMA LAYER

Xomidjonov Abror

8-12
- 8-13
DETERMINATION OF DRYER DRUM MOISTURE EXTRACTION DEPENDING ON ITS OPERATING MODES

KHURSHID YULDASHEV

27-29
- 27-29
338.242 INVESTMENT PROCESS IN THE REPUBLIC OF UZBEKISTAN

Комилжон Нарзуллаев

323-328
- 323-328
SPECIFIC CHARACTERISTICS OF UZBEK NATIONAL ART OF EMBROIDERY

Zebuniso Mamaxanova

209-212
- 209-212
UDK 537.322.15 ANALYSIS OF THE CURRENT STATUS OF THERMOELECTRIC MATERIALS AND TECHNOLOGY FOR OBTAINING AND MANUFACTURING HALF-ELEMENTS

Muxayyo Latipova

66-71
- 66-71
UDK 662.997÷621.47 SIMULATION OF HEAT TRANSFER PROCESS IN ABSORBER CHANNELS

Ulugbek Nigmatov

77-84
- 77-84
SIZE-EXCLUSION CHROMATOGRAPHY OF SOME POLYSACCHARIDE DERIVATIVES FROM NATURAL SOURCES

Azamat Boymirzayev, Ziyovadin Kamolov

117-123
- 117-123
FOUNDATIONS OF NEUROMARKETING STRATEGY IN INDUSTRY

Zinora Boltaeva

306-311
- 306-311
ORGANIZATIONAL AND ECONOMIC MECHANISMS TO SUPPORT THE EXPORT OF INDUSTRIAL PRODUCTS: A COMPARATIVE ANALYSIS OF FOREIGN EXPERIENCE AND PROPOSALS UDC 339.564:338.45.025 (575.121)

Asrorjon Ilyosov
- 238-242
PROSPECTS FOR THE DEVELOPMENT OF SERVICE INDUSTRIES

Mirzohid Bekmirzayev, Javohir Xolikov

233-237
- 233-237
UDC 621.3.082.782 DEPENDENCE OF THE TWO-DIMENSIONAL COMBINED DENSITY OF STATES ON THE ABSORBING PHOTON ENERGY IN GaAs/AlGaAs AT QUANTIZING MAGNETIC FIELD

Nozimjon Sayidov

124-135
- 124-135
677.21:021.164 INVESTIGATION OF THE INFLUENCE OF SPEED MODES OF THE COMBINED DRUM ON THE QUALITY INDICATORS OF THE TAPE

sherzod qorabayev, Tashkent Institute of Textile and Light Industry, Kumrixon Matmuratova , Alisher Yuldashev

18-23
- 18-23
BASED ON ENERGY EFFICIENT PARAMETERS OF FRUIT DRYING CHAMBER DEVICES FOR SMALL ENTERPRISES

Dilshoda Rozikova, Ne'matilla Kurbanov

107-112
- 107-112
ASSESSMENT OF IMPACT OF ARTIFICIAL INTELLIGENCE ON LABOR MARKET AND HUMAN CAPITAL

Sanjar Goyibnazarov

288-296
- 288-296
UDC: 336:658(575.1) THE IMPORTANCE OF MULTIPLIER INDICATORS IN ASSESSING THE EFFECTIVENESS OF THE CASH FLOW OF THE ENTERPRISE

Ibrokhimjon Foziljonov

243-249
- 243-249
667.287.5 Kimyo va kimyoviy texnologiyalar INVESTIGATION OF PHTHALOCYANINE DIAMIDOPHOSPHATE- COPPER BY THERMAL ANALYSIS

Muzafar Yusupov

95-100
- 95-100
PREPARATION OF A NEW STRUCTURE CREATED FOR SORTING OF GINNING SEEDS

Avazbek Obidov, Muhiddin Vohidov

185-192
- 185-192
The CREATION OF TECHNOLOGY AND EQUIPMENT FOR IMPROVED CLEANING OF COTTON FROM SMALL IMPURITIES Cotton technology

Gulkhayo Juraeva

40-43
- 40-43
DEVELOPMENT OF NEW TYPES OF VEGETABLE JUICES AND BEVERAGES TECHNOLOGY

Vaqqosov Zuxriddin, Sardorbek

59-65
- 59-65
GREEN ECONOMY AND GREEN GROWTH. INITIAL EFFORTS OF SUSTAINABLE DEVELOPMENT IN UZBEKSITAN

Yaxyo Najmiddinov

263-270
- 263-270
664.8 Qishloq xo'jaligi mahsulotlarini yetishtirish, saqlash qayta ishlash va oziq-ovqat texnologiyalari Research in beverage technology intended to support the functions of the cardiovascular system

O'tkirali Nishonov

53-59
- 53-59
1 ANALYSIS OF THE MANAGEMENT AND DEVELOPMENT OF ENVIRONMENTAL SOCIAL ENTREPRENEURSHIP IN UZBEKISTAN

Elmurod Narzullaev

276-281
- 276-281
CALCULATION OF THE LOAD ON THE FRICTION CLUTCH OF THE SEWING MACHINE

Firuza Dustova, Sabit Babadjanov

174-179
- 174-179
STATISTICAL ANALYSIS OF ASSESSMENT OF THE VOLUME OF THE HIDDEN ECONOMY IN THE REPUBLIC OF UZBEKISTAN

Xumoyunmirza Irismatov

328-332
- 328-332
664.8(035) Qishloq xo'jaligi mahsulotlarini yetishtirish, saqlash qayta ishlash va oziq-ovqat texnologiyalari IMPROVING THE TECHNOLOGY OF PRODUCTION OF FUNCTIONAL NUTRITION JUICES

Adxamjon Xodjiyev, Abdusattor, Umidjon

49-53
- 49-53
ENERGY-SAVING MODES OF THE HEAT TREATMENT OF CONCRETE

Akmalxon Raximov

213-221
- 213-221
677.076.6 LITERАTURE АNАLYSIS ON THE RESEАRCH АND DEVELOPMENT OF THE METHOD OF DESIGNING SPECIАL CLOTHES FOR WORKERS OF METАL CАSTING АND METАL PROCESSING ENTERPRISES

Islombek Xakimjonov
- 44-48
DATA PROCESSING ALGORITHM IN REMOTE MONITORING SYSTEM FOR RAW COTTON BUNTS STORED IN WAREHOUSES

Salim Norkobilov

222-232
- 222-232
ANALYSIS OF RESEARCH RESULTS ACCORDING TO INTERNATIONAL STANDARDS

Ravshan Abdullayev, Muxammadjon Azambayev, Sayfuddin Baxritdinov

163-168
- 163-168
ISSUES OF REGIONAL DEVELOPMENT OF SMALL BUSINESS

Rahmatullo Rashidov

311-318
- 311-318
DETERMINATION OF THE GEOMETRIC AND KINEMATIC PARAMETERS OF THE DEVELOPED CHAIN GEAR FOR THE 2SB-10 DRYER

KHURSHID YULDASHEV

23-27
- 23-27
678.01 Kimyo va kimyoviy texnologiyalar STUDY OF THE STRUCTURE AND PROPERTIES OF POLYVINYL CHLORIDE FILLED WITH BAZALT MINERAL

Muzafar Yusupov, panji, xayit, gayrat, abdulaxat
- 89-95
THEORETICAL FOUNDATIONS OF ESTABLISHING NEW TECHNOLOGIES ON PERSONAL MANAGEMENT SYSTEM

Ilxom Nosirov

203-209
- 203-209
UDC 338.23 INNOVATIVE ACTIVITY OF BUSINESS ENTITIES IN THE CONDITIONS OF TRANSFORMATION: A RETROSPECTIVE ANALYSIS -

Konstantin Kurpayanidi

249-259
- 249-259
The INVESTIGATION OF ELECTROMAGNETIC CURRENT TRANSFORMER PERFORMANCE CHARACTERISTICS FOR MEASURING AND CONTROLLING THE REACTIVE POWER DISSIPATION OF A SHORT-CIRCUITED ROTOR SYNCHRONOUS MOTOR We know that we have been using asynchronous motors, which are widely used in the industry and production of the world and in our country, and despite a number of advantages of this type of motor, there are also enough disadvantages. In order to eliminate these shortcomings, the aim of the article is to reduce the rapid burning of the asynchronous motor by adding an additional sensitive element to the stator slot of the asynchronous motor. and in order to prevent premature failure, the recommended method is effective enough to increase energy consumption and service life.

azamovsaidikrom1992@gmail.com

136-141
- 136-141
BASIC METHODS AND TECHNOLOGICAL SCHEMES FOR OBTAINING VEGETABLE OILS

Shavkat Xakimov, Muxammadali Kamoliddinov

113-117
- 113-117
EVOLUTION OF MANAGEMENT SCIENCE

Asror Norov

296-305
- 296-305
541.183 Kimyo va kimyoviy texnologiyalar Physico-chemical properties of activated adsorbents based on Logan bentonite

G'aniyeva Nazokat, G'olibjon, Ismoil

72-77
- 72-77
661.632.14 Kimyo va kimyoviy texnologiyalar PROCUREMENT OF LOCAL RAW MATERIALS COMPLEX FERTILIZERS WITH NITROGEN-PHOSPHATE-POTASSIUM CONTAINING MOISTURE

Muzafar Yusupov, tal'at, doniyor

84-89
- 84-89
CARRYING OUT THEORETICAL STUDIES OF THE COTTON REGENATOR

Shavkatjon Mamajanov

192-198
- 192-198
TDTU Teplovoz dizellari tirsakli valini diagnostika qilish usullarini ishlab chiqish va baholash usullarini takomillashtirish. Kudratov Shohijaxon Ixtiyorovich Toshkent davlat transport universiteti ”Lokomotivlar va lokomotiv xo’jaligi” kafedrasi tayanch doktoranti.

Кудратов Шохижахон

141-145
- 141-145
METHODOLOGICAL ISSUES OF ORGANIZING INTERNAL AUDITS AND CONTROL OF OFF-BUDGET FUNDS IN HIGHER EDUCATION INSTITUTIONS

Azizkhon Khhojaev

199-203
- 199-203
TESTING NEW ACTIVATED COALS AU-T AND AU-K FROM LOCAL RAW MATERIALS WHEN FILTRATION OF THE WASTE MDEA AT GAZLIN GAS PROCESSING PLANT

Abdusalom Xudayberdiyev, Lobar Oripova, Ruslan Xayitov

101-107
- 101-107
LEGAL REGULATION OF ENTREPRENEURIAL ACTIVITY

Firuza bayboboyeva

281-288
- 281-288
656.13 COORDINATION OF THE MOVEMENT OF TRANSPORT TYPES IN AREAS WITH HIGH PASSENGER FLOW COORDINATION OF THE MOVEMENT OF TRANSPORT TYPES IN AREAS WITH HIGH PASSENGER FLOW

Davron Yo'ldoshev, Shoyqulovich

157-162
- 157-162
2 THE METHODS FOR MEASURING THE EFFECTIVENESS OF SOCIAL ENTREPRENEURSHIP ACTIVITY

Elmurod Narzullaev

270-276
- 270-276
IMPROVEMENT OF THE DESIGN OF THE SHUTTLE DRUM IN THE SEWING MACHINE

Zamira Vafayeva, Jumagul Matyakubova, munisa

179-185
- 179-185
maqola

oybek Teshaboyev

29-35
- 29-35
CREATION OF TECHNOLOGY AND EQUIPMENT FOR IMPROVED CLEANING OF COTTON FROM SMALL IMPURITIES

Sobitxon Xashimov

36-40
- 36-40
MAIN CHARACTERISTICS OF THE RISK MANAGEMENT MECHANISM IN MANUFACTURING ENTERPRISES

Shuxrat Muxitdinov

259-262
- 259-262
687.141.017.872.004.15 Compression sports wear ANALYSIS OF ELASTIC FABRICS FOR COMPRESSION SPORTSWEAR IN THE NEW ASSORTMENT

Joxongir Monnopov

13-18
- 13-18
the A NEW KEY STREAM ENCRYPTION ALGORITHM AND ITS CRYPTANALYSIS The new stream encryption algorithm (NSA-New Stream Algorithm) is proposed in this work. The input parameters are considered a 128-bit secret key and 128-bit initialization vectors in the new algorithm. A 64-bit line is generated in each round as the output value. The architecture of the algorithm is particularly suitable for efficient hardware implementations, together with this, this algorithm is also suitable for software implementation. On the other hand, the security was evaluated for resynchronization attack, related key attack, and attack methods on the basis of linear correlation of the output sequence. Analysis confirms that this algorithm is a secure stream encryption algorithm.

Ilhom Rahmatullayev

146-157
- 146-157
COTTON FIBER RATING, INNOVATION CURRENT DEVELOPMENTS, PROSPECTS FOR COOPERATION OF FARMS AND CLUSTERS

Ravshan Abdullayev

168-173
- 168-173
ISSUES FOR ENSURING ECONOMIC STABILITY OF CHEMICAL INDUSTRY ENTERPRISES USING FOREIGN EXPERIENCE

Abdumalik Kadirov

318-322
- 318-322