Vol. 9 No. 1 (2024): Scientific and Technical Journal of Namangan Institute of Engineering and Technology

View Vol. 9 No. 1 (2024): Scientific and Technical Journal of Namangan Institute of Engineering and Technology

DOI: https://doi.org/10.61151/stjniet.v9i1

Published: 2024-05-06

R REGULATIONS OF THE REGIONAL DEVELOPMENT OF SMALL BUSINESS

Rahmatullo Rashidov

315-324
- 315-324
PROSPECTS FOR IMPROVING PRODUCT QUALITY IN TEXTILE INDUSTRY ENTERPRISES BASED ON QUALITY POLICY SYSTEMS PROSPECTS FOR IMPROVING PRODUCT QUALITY IN TEXTILE INDUSTRY ENTERPRISES BASED ON QUALITY POLICY SYSTEMS

Mukhammadali Qakhramonov, Qosimov Axtamhon

223-229
- 223-229
SYNTHESIS OF ACRYLAMIDE COPOLYMERS WITH IMPROVED VISCOSITY CHARACTERISTICS

Аllamurtova , Tanatarov, Sharipova, Аbdikamalova Aziza, Kuldasheva Shaxnoza

156-164
- 156-164
Prospects for improving product quality in textile industry enterprises based on quality policy systems

Mukhammadali Qakhramonov

223-229
- 223-229
STATE OF DEVELOPMENT OF FIBER PRODUCTS – CLEANING, COMBING TECHNIQUES AND TECHNOLOGIES

Maftuna Inoyatova, Ergasheva Shaxzoda, Kamalova Iroda, Toshpo’latov Mansurxon

21-29
- 21-29
THEORETICAL ANALYSIS OF THE SEPARATION OF FINE DIRT FROM COTTON

Dildora Ibrokhimova, Kamol Akhmedov, Asilbek Mirzaumidov

260-265
- 260-265
ANALYSIS OF USE OF SORTING ALGORITHMS IN DATA PROCESSING ANALYSIS OF USE OF SORTING ALGORITHMS IN DATA PROCESSING

Hamidullo Tuychibaev

280-288
- 280-288
UDC 004.421 ANALYSIS OF METHODS AND ALGORITHMS OF CREATION OF MULTIMEDIA ELECTRONIC TEXTBOOKS

Adiba Isoqova

307-314
- 307-314
DEVELOPMENT OF THE POLYGRAPHIC INDUSTRY IN THE CONDITIONS OF INDEPENDENCE

Babakhanova Halima, Ravshanov, Azizbek Saodatov, Saidova

144-150
- 144-150
677.01 ANALYSIS OF RESEARCH ON CHANGING THE SURFACE OF THE GRID IN A DEVICE FOR CLEANING COTTON FROM FINE IMPURITIES

Saidmuxtor Qozoqov

185-191
- 185-191
MODERNIZED SEWING MACHINE BOBBIN CAP HOOK THREAD TENSION REGULATOR

Sabrina Mukhamedjanova

53-56
- 53-56
DEVELOPMENT OF SIMPLE EXPERIMENTAL METHODS FOR DETERMINING THE COEFFICIENT OF SLIDING AND ROLLING FRICTION

Bunyod Abdusattarov, Mamahonov A’zam

237-248
- 237-248
A Creating a patterned decorative landscape using knitted shear waste on the surface of the paint product

Iroda Kamalova, Maftuna Inoyatova, Surayo Rustamova , Mohira Madaliyeva

16-20
- 16-20
66.045.126 DEVELOPMENT OF AN ENERGY-SAVING TECHNOLOGICAL SYSTEM TO IMPROVE THE HEAT TREATMENT STAGE OF MILK

Makhmudjon Tojibaev, Khudayberdiyev Absalom

109-114
- 109-114
TECHNOLOGY OF FREEZE-DRYING OF RAW MEAT

Ergashev Oybek , Mirazam Meliboyev, Qurbonov Ulug’bek

96-101
- 96-101
MECHANISM FOR ASSESSMENT OF FACTORS AFFECTING THE DEVELOPMENT OF SMALL BUSINESS SUBJECTS

Rusrambek Israilov

325-333
- 325-333
547-32.54-057:543.33 Spectroscopic analysis of a sorbent based on urea, formalin, and succinic acid and its complexes with ions of Cu(II), Zn(II), Ni(II) Spectroscopic analysis of a sorbent based on urea, formalin, and succinic acid and its complexes with ions of Cu(II), Zn(II), Ni(II)

Gulvar Muqumova, Xudoynazarovich, Shaxnoza Mo'minova, Sherzod Kasimov, Naima Karimova

131-137
- 131-137
STUDY OF EFFECT OF DRYING AGENT COMPONENT ON CLEANING EFFICIENCY

RAKHMATJON ROZMETOV, Kuliyev Toxir, Tuychiev Timur

57-64
- 57-64
PROBLEMS AND SOLUTIONS TO THE QUALITY OF THE GINING PROCESS IN UZBEKISTAN

Ravshan Abdullayev

212-215
- 212-215
664.34.063.8 PHYSICAL-CHEMICAL INDICATORS OF PLUM OIL OBTAINED BY THE PRESSING METHOD PHYSICAL-CHEMICAL INDICATORS OF PLUME OIL OBTAINED BY THE PRESSING METHOD

Azizbek Davlyatov, Abdurasulovich, Makhmudovoch

102-108
- 102-108
DESCRIPTION OF PROTEINS AND POISONS CONTAINED IN FLOUR PRODUCED FROM WHEAT GRAIN PRODUCED IN OUR REPUBLIC

Zuxriddin Voqqosov, Khodzhiev Ma'ruf

120-125
- 120-125
ON THE INFLUENCE OF THE WEAR RESISTANCE OF GRATE BARS ON THE TECHNOLOGICAL GAP BETWEEN THEM IN FIBER SEPARATING MACHINES

Yusupov, Muminov, Iskandarova, Shin

80-85
- 80-85
METHODOLOGY FOR THE DEVELOPMENT OF A LOW CARGO NETWORK

Abdimurot Kuziyev

289-297
- 289-297
661.635.68 Kimyo va kimyoviy texnologiyalar Determination of the Inhibitory Efficiency of the Inhibitor Synthesized Based on Maleic Anhydride by the Electrochemical Method

Muzafar Yusupov, Ilkhom, xayit, baxtiyor

126-130
- 126-130
FOR SILK INDUSTRY ENTERPRISES: DEVELOPMENT OF AN IMPROVED MODEL OF PDCA CYCLE FOR SILK INDUSTRY ENTERPRISES: DEVELOPMENT OF AN IMPROVED MODEL OF PDCA CYCLE

Mukhammadali Qakhramonov, Qosimov Axtamhon

230-236
- 230-236
RESEARCH PHYSICAL AND MECHANICAL PROPERTIES AND DURABILITY OF SULFUR CONCRETE

Nodira Amanova, Turaev Khayit, Alikulov Rustam, Khaitov Bozar, Eshdavlatov Erkin, Makhmudova Yulduz

165-169
- 165-169
STUDY OF PHYSICAL-MECHANICAL PROPERTIES OF FABRICS USED FOR MEN'S OUTER KNIT ASSORTMENT

Sayyora Azimova, Nabidjanova Nargiza

3-6
- 3-6
OPTOELECTRONIC DEVICES FOR INFORMATION TRANSMISSION OVER SHORT DISTANCES

Kuldashov; Nabiev

65-72
- 65-72
CAUSES OF FLOODS AND FLOODS AND THEIR RAILWAY AND ECONOMY INFLUENCE ON CONSTRUCTION

Razikov R, Shavkat Abdazimov, Saidov D, Amirov Muxtor

266-271
- 266-271
The STUDY OF CLOTHING REQUIREMENTS FOR CHILDREN WITH CEREBRAL PALSY CLOTHING REQUIREMENTS FOR CHILDREN WITH CEREBRAL PALSY

Nargiza Vahobova, Nigmatova Fatima, Kozhabergenova Kalamkul

30-36
- 30-36
655.344.022.72.001.53 Analysis of compotions of the fountain solition for offset printing

Muxlisa Abduxalilova, Xalima Babaxanova

138-143
- 138-143
DETERMINATION ZIRCONIUM WITH THE SOLUTION OF 1 - (2-HYDROXY-1-NAPHTHOYAZO)-2-NAPHTHOL-4-SULFATE

Nigora Kutlimurotova, Tursunqulov Jasur, Jalilov Fazliddin, Rahimov Samariddin

151-155
- 151-155
53.083.1 MATHEMATICAL ALGORITHM FOR PREDICTING THE CALIBRATION INTERVAL AND METROLOGICAL ACCURACY OF GAS ANALYZERS BASED ON INTERNATIONAL RECOMMENDATIONS ILAC-G24:2022/OIML D 10:2022 (E)

Mirolim Mahmudjonov

192-196
- 192-196
STUDYING THE TYPES AND THEIR COMPOSITION OF POLLUTANT MIXTURES CONTAINING COTTON SEEDS

Khuramova Khadicha, Rustam Muradov

50-52
- 50-52
DEVELOPMENT OF A NEW ROTARY FEEDER DESIGN AND BASED FLOW PARAMETERS FOR A SEED FEEDER DEVICE

Elmurod Aliyev, Mamahonov A’zam

249-259
- 249-259
- ENHANCING COTTON GINNING PROCESSING METHOD FOR BETTER FIBRE QUALITY COTTON GINNING PROCESSING

Makhliyo Salokhiddinova, Lola

12-15
- 12-15
UDC {62}21474 PRODUCTION WАSTEWАTER TREАTMENT TECHNOLOGIES (On the exаmple of Ultrаmаrine pigment production enterprise)

Khurshid Kiryigitov, Abilovich

203-207
- 203-207
DEVELOPMENT OF TECHNOLOGY FOR THE PRODUCTION OF FUNCTIONAL-ORIENTED BREAD PRODUCTS

Shukrullo Turg’unov, Mallabayev Odiljon

115-119
- 115-119
ANALYSIS ОF DEFECTS AND SОLUTIОNS IN INVESTMENT ACTIVITY IN CОMMERCIAL BANKS

Gulkhayо Malikоva

346-351
- 346-351
UDK 677.21.021 ANALYSIS OF THE IMPROVEMENT OF PNEUMATIC OUTLETS IN THE PNEUMATIC TRANSPORT SYSTEM

Elmira Mukhametshina, Rustam Muradovich

37-44
- 37-44
INNOVATIVE SOLUTIONS FOR DUST CONTROL IN COTTON GINING ENTERPRISES

Abdulkhadi Otamirzayev

45-49
- 45-49
INFLUENCE OF VARIOUS MECHANICAL IMPURITIES IN TRANSFORMER OILS ON ELECTRIC AND MAGNETIC FIELDS

Bobomurod Avazov, Yusupov Dilmurod

216-222
- 216-222
621.512 IMPROVING THE DESIGN OF WATER SPRAY NOZZLES IN COOLING TOWERS.

Shahlo Pardayeva, Umidjon Kayumov, Rustam Djurayev

178-184
- 178-184
621.43:621.311.24:536.24 EVALUATION OF THE TECHNICAL CONDITION OF THE ENGINE USING THE ANALYSIS OF THE COMPOSITION OF GASES USED IN INTERNAL COMBUSTION ENGINES

Saida Atajonova; Jizzax politexnika instituti

197-202
- 197-202
THEORETICAL STUDY OF FIBER BEHAVIOR IN A NEW STRUCTURED ELONGATION PAIR

Kuliev, Jumabaev, Jumaniyazov

86-95
- 86-95
ANALYSIS OF ATMOSPHERIC AIR OF SURKHONDARYO REGION USING PHYSICO-CHEMICAL METHODS

Oyimxol Niyozova, Turayev Khait, Jumayeva Zulkhumar

298-306
- 298-306
338:502 PRОSPECTS ОF TRАNSITIОN TО GREEN ECОNОMY

Nilufar Yuldasheva

334-345
- 334-345
UDK 621.01 Analysis of dependence on the parameters of the angles and loadings of the conveyor shaft and the drum set with a curved pile after cleaning cotton from small impurities. Anvar Djurayev, Tashkent Textile and Light Industry Institute d.t.s. professor. Uzbekistan. Tashkent.

Temurbek Nizomov

272-275
- 272-275
IMPROVING THE QUALITY OF GINING ON PRODUCTS

Ravshan Abdullayev

208-211
- 208-211
DEVELOPMENT OF MODEL LINES OF MEN'S TOP KNITTING ASSORTMENT

Sayyora Azimova, Nabidjanova Nargiza

7-11
- 7-11
IMPROVING THE ELASTIC MASS OF FIBER ON THE SURFACE OF THE SAW CYLINDER IN FIBER CLEANING EQUIPMENT USING AN ADDITIONAL DEVICE

Kuliev, Abbazov, Egamberdiev

73-79
- 73-79
INTRODUCTION INTERDISCIPLINARY NATURE TO HIGHER EDUCATION INSTITUTIONS

Sardor Jabbarov

276-279
- 276-279