Deformation of the shaft in torsion and the effect of torsion along with bending

Deformation of the shaft in torsion and the effect of torsion along with bending

Authors

  • Avazbek Obidov Namangan institute of engineering and technology
  • Asilbek Namangan institute of engineering and technology
  • Axrorbek Namangan institute of engineering and technology
  • Doniyorjon Tashkent State Transport University

DOI:

https://doi.org/10.61151/stjniet.v9i2.487

Keywords:

shaft, singularity, bending vibrations, saw cylinder, slack, technological slot

Abstract

Insufficient smoothness of the saw cylinder shaft leads to impermissible misalignments in the gap between the columns, which has a very negative effect on the grinding process. In this case, using the method of equivalent diameters developed by B.P. Jemochkin, we determine the bending and turning angles of the saw cylinder shaft.

Downloads

Published

2024-06-29

How to Cite

Obidov, A., Mirzaumidov , A., Abdurasulov , A., & Otaqoʻziyev , D. (2024). Deformation of the shaft in torsion and the effect of torsion along with bending. Scientific and Technical Journal of Namangan Institute of Engineering and Technology, 9(2), 208–216. https://doi.org/10.61151/stjniet.v9i2.487

Issue

Vol. 9 No. 2 (2024): Scientific and Technical Journal of Namangan Institute of Engineering and Technology

Section

Articles