Том 9 № 4 (2024): Scientific and Technical Journal of Namangan Institute of Engineering and Technology

Показать Том 9 № 4 (2024): Scientific and Technical Journal of Namangan Institute of Engineering and Technology

DOI: https://doi.org/10.61151/stjniet.v9i4

Опубликован: 2025-03-17

THEORETICAL AND EXPERIMENTAL STUDY OF THE CRACK FORMATION DEVICE IN THE SHELL OF APRICOT KERNELS

Khairullo Djuraev, Sherali Urinov

168-174
- 168-174 (English)
THE ELEMENTS AND OXIDE CONTENT OF THE CHEMICAL COMPOSITION OF THE FELDSPAR

Dilnoza Jumaeva, Kunkhoja Zaripbaev, Firuz Maxmudov

242-248
- 242-248 (English)
WATER VAPOR ADSORPTION ISOTHERM IN ZEOLITES REGENERATED BY MICROWAVE THERMOXIDATION METHOD

Inomjon Maxmudov, Oybek Ergashev

235-241
- 235-241 (English)
THERMODYNAMICS OF CONGO RED DYE ADSORPTION PROCESSES ON MINERAL AND CARBON ADSORBENTS

Mansurxon Mehmonxonov, Oybek Ergashev, Aziza Abdikamalova, Khayot Bakhronov, Dilzoda Askarova, N Xudoyberdiyev, Kamoliddin Xolikov

228-234
- 228-234 (English)
SYNTHESIS OF MELAMINE-FORMALDEHYDE RESINS MODIFIED WITH N-BUTANOL

Kudrat Yusupov, Furkat Erkabaev, Dilmurod Ergashev, Umidjon Rakhimov, Muhammadrajab Numonov

219-227
- 219-227 (English)
ENERGETICS OF ADSORPTION OF WATER MOLECULES TO AEROSIL

Olimjon Qodirov, Oybek Ergashev

212-218
- 212-218 (English)
INNOVATIVE ENVIRONMENTAL PACKAGING FOR SEPARATING STORAGE OF TWO COMPONENTS, ALLOWING TO EXTEND THE LIFETIME WITHOUT PRESERVATIVES

ULBOSIN ESHBAEVA, Litvyak Vladimir, Mamurjon Ergashev

204-211
- 204-211 (English)
ISOTHERM OF BENZENE ADSORPTION AND DIFFERENTIAL HEAT OF ADSORPTION ON AgZSM-5 ZEOLITE

Tolibjon Abdulxayev, Mirjalol Mukhammadjonov, Fotima Mirzarakhimova

198-203
- 198-203 (English)
STUDY OF THE COMPOSITION AND MAIN CHARACTERISTICS OF PETROLEUM OILS AND THEIR EMULSIONS

Marifatoy Urinbova, Aziza Abdikamalova, Oybek Ergashev, Izzat Eshmetov, Akmaljon Ismadiyarov

175-181
- 175-181 (English)
ANALYSIS OF RESEARCH ON SMALL WIND ENERGY DEVICES

UMID KHUDOYBERDIEV, Jurabek Izzatillaev

249-257
- 249-257 (English)
METHODS OF CONCENTRATION OF FRUIT JUICES AND THEIR ANALYSIS

Kamola Aripova

162-167
- 162-167 (English)
PREPARING PEACH SEED FOR OIL EXTRACTION AND IMPROVING OIL EXTRACTION THROUGH PRESSING

Zilola Madaminova, Anvar Khamdamov, Absalom Xudayberdiyev

154-161
- 154-161 (English)
PROSPECTS FOR THE USE OF ROSE HIPS IN FOOD TECHNOLOGY

Dilorom Saribaeva, Sohiba Atamirzaeva, Asalxon Kayumova

115-120
- 115-120 (English)
FILLING SAUCES FOR CANNED FISH AND THEIR LAYER KINETICS

Samara Toshboyeva, Muzaffar Dadamirzaev

110-114
- 110-114 (English)
THEORETICAL ASPECTS OF OBTAINING OXIDATION-STABLE VEGETABLE OILS

Aslbek Yulchiev, Oybek Zufarov, Shoira Isroilova , Kamar Serkayev

101-109
- 101-109 (English)
EVALUATION OF AESTHETICITY OF WOMEN'S DRESS MODELS BASED ON DEEP LEARNING MODELS

Shohruxmirzo Mahsudov, Mashkhura Abdukarimova, Rustam Lutfullaev, Nargiza Usmanova

94-100
- 94-100 (English)
PROGRESSIVE METHOD OF COTTON REGENERATION

Khadicha Khuramova

89-93
- 89-93 (English)
FROM STREET TRAFFIC TO SPACE: INNOVATIONS IN AUTONOMOUS VEHICLES

Sherzod Korabayev

3-9
- 3-9 (English)
MATHEMATICAL MODEL OF SYSTEM ANALYSIS OF TECHNOLOGICAL PROCESSES IN THE FORM OF KEY PRINCIPLES FOR EFFECTIVE DECISION-MAKING

Saidakhon Atajonova

258-263
- 258-263 (English)
MATHEMATICAL MODELING OF HEAT TRANSFER THROUGH SINGLE-LAYER AND MULTI-LAYER CYLINDRICAL WALLS IN BUILDINGS AND STRUCTURES

Rustam Kuchkarbayev

264-268
- 264-268 (English)
MODELING THE FUNCTIONALITIES OF AN AUTOMATED SYSTEM FOR MANAGING MOVEMENT IN THE AIR

Sanjar Abdullayev

276-284
- 276-284 (English)
DESCRIBING COMPUTATIONAL DOMAINS IN APPLICATIONS FOR SOLVING THREE-DIMENSIONAL PROBLEMS OF TECHNOLOGICAL PROCESSES

Azambek Turakulov

285-292
- 285-292 (English)
ANALYSIS OF METHODS AND PROSPECTS FOR APPLICATION OF OPTICAL METHODS FOR CONTROL OF WORKING SURFACES OF CYLINDER LINERS OF INTERNAL COMBUSTION ENGINES

Sobir Utaev, Abdugani Turaev

327-334
- 327-334 (English)
SCIENTIFIC INNOVATIVE DEVELOPMENT OF COTTON GINING

Ravshan Abdullayev

392-396
- 392-396 (English)
MEASURES TO IMPROVE THE QUALITY OF FLUFF

Mukhammadjon Azambayev

387-391
- 387-391 (English)
AIR FLOW CONTROL FACTORS IN PNEUMATIC TRANSPORT DEVICE

Farxod Kholmirzaev

397-403
- 397-403 (English)
SEPARATION OF COTTON FROM AIRFLOW IN PNEUMATIC TRANSPORT SYSTEMS OF THE COTTON INDUSTRY

Nosir Sharibaev, Azimjon Makhmudov

404-409
- 404-409 (English)
EFFECT OF STEAM TEMPERATURE ON YARN MOISTURE REGULATION IN TEXTILE INDUSTRY

Nosir Sharibaev, Badriddin Mirzabaev

410-414
- 410-414 (English)
INCREASING THE USEFUL SURFACE OF THE MESH SURFACE

Sahobiddin Sultanov, Mashxura Salomova, Orif Mamatkulov

415-420
- 415-420 (English)
KINEMATICS OF THE FOOT IN A HEALTHY PERSON'S FOOT AND ANKLE INJURY

Madina Мuhammedova

421-428
- 421-428 (English)
METHODS FOR ASSESSING THE EFFECTIVENESS OF WASTE RECYCLING BUSINESS ACTIVITIES IN THE ENVIRONMENTAL SECTOR

Ulugbek Ergashev, Otabek Djurabaev

455-459
- 455-459 (English)
DETAILED ANALYSIS OF THE PHYSICOCHEMICAL CHARACTERISTICS OF DISTILLATE FRACTIONS

Abdugafor Khurmamatov, Sarvar Boyturayev, Foziljon Shomansurov

142-153
- 142-153 (English)
MATHEMATICAL MODEL OF MACHINE AGGREGATE OF TILLAGE EQUIPMENT PROCESS

A’zam Mamaxonov

293-303
- 293-303 (English)
629.423.1 Development of a program for determining eccentricity by analyzing the magnetic field in the air gap of an asynchronous motor

Mirabror Vokhidov

319-326
- 319-326 (English)
543. 432:545. 82:546. 562 APPLICATION OF 1-(2-HYDROXY-1-NAPHTOAZO)-2-NAPHTHOL-4- SULFO ACID IN AMPEROMETRIC DETERMINATION OF SCANDIUM ION

JASUR TURSUNQULOV, NIGORA QUTLIMUROTOVA

182-190
- 182-190 (English)
DETERMINATION OF THE INFLUENCE OF THE LENGTH OF THE TESTED YARN SAMPLES ON THEIR MECHANICAL CHARACTERISTICS

MUSLIMBEK ABDUJABBAROV, DILBAR ALIEVA, RAKHIM KARIMOV

35-40
- 35-40 (English)
Improvement of the Linter Machine and Development of Its Working Scheme

Maqsudbek Shamshitdinov

356-361
- 356-361 (English)
UO‘K 677.21 THE EFFECT OF THE ANGLE OF HEAT AGENT SUPPLY TO THE DRYING- CLEANING\ EQUIPMENT ON COTTON QUALITY AND CLEANING EFFICIENCY OF THE EQUIPMENT

MASHHURA SALOMOVA, Xayrullo Sharipov, Tuychiev Timur

28-34
- 28-34 (English)
UO‘K 677.024.544 Theoretical Analysis of the Coefficient of Friction Induced by the Pressure Force of a Vertical Rope Acting from Above and Below

Qahramon Homidov

347-355
- 347-355 (English)
STUDY OF THE QUALITY OF FRUIT PASTELA PRODUCTS

SHOKHSANAM TURGUNPOLATOVA

121-125
- 121-125 (English)
SIMULATION OF EQUATION OF MOTION OF THE NEW CONSTRUCTION GIN MACHINE.

Shuhrat Azizov

339-346
- 339-346 (English)
A Determinаtiоn оf seed dаmаge in the pneumаtic trаnspоrt system by cоnducting experiments

Begzod Boltabayev

335-338
- 335-338 (English)
UDK 677.21.021 ANALYSIS OF COTTON FLOW BEHAVIOR IN DIFFERENT PNEUMATIC PIPES

Elmira Mukhametshina

362-368
- 362-368 (English)
DESIGNING FABRICS FOR A GIVEN STRETCHABILITY

SITORAKHON KHAMRAEVA , DILFUZA КADIROVA, ASKARALI DAMINOV

21-27
- 21-27 (English)
DETERMINATION OF ALTERNATIVE TECHNOLOGICAL FACTORS FOR THE PRODUCTION OF FUNCTIONAL FABRIC WITH A COMPLEX STRUCTURE

SEVARAXON KHAMRAEVA, DILFUZA КADIROVA , BEХZOD DAVLATOV

15-20
- 15-20 (English)
RESEARCH RESULTS ON THE SELECTION OF THE MESH SURFACE OF A LINT-CLEANING DEVICE

Jahongir Abdurahmonov

311-318
- 311-318 (English)
DEVELOPMENT OF COAL ENRICHMENT AND GAS EXTRACTION TECHNOLOGY FOR THE USE OF CONSTRUCTION MATERIALS INDUSTRIAL ENTERPRISES DEVELOPMENT OF COAL ENRICHMENT AND GAS EXTRACTION TECHNOLOGY FOR THE USE OF CONSTRUCTION MATERIALS INDUSTRIAL ENTERPRISES

Azizbek Kucharov

191-197
- 191-197 (English)
665.6: 665.6/7: 662.6/.9 TECHNICAL AND ECONOMIC ASPECTS OF PROCESSING PYROLYSIS DISTILLATE INTO MOTOR FUEL

Abdukarim Xudayberdiyev

304-310
- 304-310 (English)
244224 On delayed technological objects and their characteristics

Nodira Ikromjonova, Dilmurod Qodirov

437-443
- 437-443 (English)
ALGORITHM FOR CREATING STRUCTURED DIAGRAMS OF AUTOMATIC CONTROL SYSTEMS

Hakim Abdullayev

429-436
- 429-436 (English)
677.21.002.8 Difference in the length of individual yarn composition of twisted mixed yarn and comparative analysis of single-thread elongation deformations

Dilmuhammad Atambayev

269-275
- 269-275 (English)
A Analysis of experiments on the process of deodorization of vegetable oil using floating nozzles Analysis of experiments on the process of deodorization of vegetable oil using floating nozzles

Sardor Sultanov

126-131
- 126-131 (English)
UDK 664.34:637.144 PHYSICAL-CHEMICAL ANALYSIS OF OIL TAKEN FROM SEEDS OF SAFFLOWER

Bexzod Adashev

132-136
- 132-136 (English)
ANALYSIS OF THE MAINTECHNOLOGICALPARAMETERS OF THE CONDENSER

Asilbek Mirzaumidov, Khusankhon Ganikhanov, Aybek Mavlyanov , Alisher Abdusamatov

55-59
- 55-59 (English)
The equation of motion of cotton fiber in the condenser

Asilbek Mirzaumidov, Khusankhon Ganikhanov , Aybek Mavlyanov , Alisher Abdusamatov

83-88
- 83-88 (English)
Thе sсiеntifiс bаsis оf thе lightеnеd shаft

Asilbek Mirzaumidov, Ауbеk Mаvlуаnоv

60-68
- 60-68 (English)
Cotton cleaner with multifaceted grates

Asilbek Mirzaumidov, Khosiyat Nurillaeva

77-82
- 77-82 (English)
Modeling of laser processingof thin-walled steel gears

Asilbek Mirzaumidov, Abbos Elmanov

69-76
- 69-76 (English)
UDC 621.565.93/95 INFLUENCE OF SURFACE LAYER THICKNESS ON HYDRAULIC RESISTANCE OF THE DEVICE Purpose of the work: The increase in the thickness of the scale on the inner surfaces of technological pipes reduces the cross-sectional area of the pipe, thereby decreasing its conductivity. As a result, the coefficient of friction in the pipe increases, which in turn leads to an increase in its hydraulic resistance. This causes a sharp increase in the amount of energy consumed, as the required pump power for fluid transportation rises accordingly

Mirzaakbar Ismailov

137-141
- 137-141 (English)
Research on physical and mechanical properties of fabrik selected for special clothing of preschool children

Madina Juraeva, Nargiza Nabidjonova

41-44
- 41-44 (English)
STUDYING THE АLTERNАTIVE TECHNОLОGICАL FАCTОRS ОF THE LООM IN THE PRОDUCTIОN ОF TEXTILES BАSED ОN BАSАLT YАRN

Ruziboy Yangiboyev

45-54
- 45-54 (English)
OBTAINING AND ANALYZING CORRELATIONAL MATHEMATICAL MODELS OF THE SIZING PROCESS

Ruziboy Yangiboyev

369-378
- 369-378 (English)
GRAPHING CIRCLES, PARABOLAS, AND HYPERBOLAS USING SECOND-ORDER LINEAR EQUATIONS IN EXCEL Second-order equation, circle, parabola, hyperbola, center, radius, geometric shapes, mathematical formula, graphs.

Farxod Uzoqov

444-448
- 444-448 (English)
334.75(575.16) ISSUES OF DEVELOPING WOMEN'S ENTREPRENEURSHIP

Dilfuza Zulfikarova

449-454
- 449-454 (English)
EFFICIENT SEPARATION OF FIBERS FROM SAW TEETH IN THE NEWLY DESIGNED GIN MACHINE

Mirsharoffiddin Mirzakarimov

379-386
- 379-386 (English)
INVESTIGATION OF VERTICAL FORCED VIBRATION IN THE LONGITUDINAL - VERTICAL PLANE OF A BINDER THAT SOFTENS THE CRUSH BETWEEN COTTON ROWS

Nodirbek Egamov

10-14
- 10-14 (English)