STATIC CALCULATION OF THE SAW BLADE OF THE SAW GIN

STATIC CALCULATION OF THE SAW BLADE OF THE SAW GIN

Авторы

  • Bobirmirzo Mirjalolzoda Namangan Institute of Engineering and Technology
  • Adham Umarov Namangan Institute of Engineering and Technology
  • Alisher Akbaraliyev Namangan Institute of Engineering and Technology
  • MUTAKHKHIRKHON ABDUVAKHIDOV Namangan Institute of Engineering and Technology

DOI:

https://doi.org/10.61151/stjniet.v10i1.748

Ключевые слова:

Shaft, hexagonal shaft, saw blade, stresses, displacements, deformation, safety margin

Аннотация

The article considers the strength of saw blades for conventional and hexagonal shafts. The maximum stress is determined to be 191 MPa and 193 MPa, the maximum displacement is 0.048 mm and 0.026 mm, the maximum deformation is 0.00070 and 0.00051, respectively, and they are formed in the teeth., the minimum safety margin is 1.5. A saw blade designed for a 6-sided shaft, in some mechanical parameters, exceeds a blade designed for a saw with a round cross-section.

Загрузки

Опубликован

2025-03-31

Как цитировать

Mirjalolzoda, B., Umarov, A., Akbaraliyev, A., & ABDUVAKHIDOV, M. (2025). STATIC CALCULATION OF THE SAW BLADE OF THE SAW GIN. Scientific and Technical Journal of Namangan Institute of Engineering and Technology, 10(1), 203–207. https://doi.org/10.61151/stjniet.v10i1.748

Выпуск

Том 10 № 1 (2025): Scientific and Technical Journal of Namangan Institute of Engineering and Technology

Раздел

Articles