The ANALYSIS OF THE INFLUENCE OF THE FILLING COEFFICIENT OF THE SCREW CLEANER SYSTEM WITH SEEDED COTTON ON THE CURRENT CONSUMPTION OF THE SYSTEM

Abstract

This article substantiates the possibility of increasing the productivity and efficiency of cleaning process machines by improving the design of the screw cleaner, which ultimately allows you to get high-quality products. Also, the factors affecting the movement of raw cotton in the chute of the device are determined, a scheme for calculating the movement of raw cotton together with the flow of hot air in the feed zone, as well as the forces acting on the surface of the mesh is presented. To solve the problem of the process of feeding the flow of raw cotton in a stationary mode, it is established that the pressure must be positive at an arbitrary section of the cross-section.

In the article, using the Maple program, the dependence of the flow of raw cotton Q is determined for different values of the filling factor of the flow of raw cotton transferred from the hopper of the device, which are presented in the form of graphs.