STATIC CALCULATION OF THE SAW BLADE OF THE SAW GIN

STATIC CALCULATION OF THE SAW BLADE OF THE SAW GIN

Authors

  • Mirjalolzoda Bobirmirzo Namangan Institute of Engineering and Technology
  • Umarov Adham Namangan Institute of Engineering and Technology
  • Akbaraliyev Alisher Namangan Institute of Engineering and Technology
  • MUTAKHKHIRKHON ABDUVAKHIDOV Namangan Institute of Engineering and Technology

DOI:

https://doi.org/10.61151/stjniet.v10i1.748

Keywords:

Shaft, hexagonal shaft, saw blade, stresses, displacements, deformation, safety margin

Abstract

The article considers the strength of saw blades for conventional and hexagonal shafts. The maximum stress is determined to be 191 MPa and 193 MPa, the maximum displacement is 0.048 mm and 0.026 mm, the maximum deformation is 0.00070 and 0.00051, respectively, and they are formed in the teeth., the minimum safety margin is 1.5. A saw blade designed for a 6-sided shaft, in some mechanical parameters, exceeds a blade designed for a saw with a round cross-section.

Downloads

Published

2025-03-31

How to Cite

Mirjalolzoda, B., Umarov, A., Akbaraliyev, A., & ABDUVAKHIDOV, M. (2025). STATIC CALCULATION OF THE SAW BLADE OF THE SAW GIN. Scientific and Technical Journal of Namangan Institute of Engineering and Technology, 10(1), 203–207. https://doi.org/10.61151/stjniet.v10i1.748

Issue

Vol. 10 No. 1 (2025): Scientific and Technical Journal of Namangan Institute of Engineering and Technology

Section

Articles