CALCULATION OF THE LOAD ON THE FRICTION CLUTCH OF THE SEWING MACHINE

CALCULATION OF THE LOAD ON THE FRICTION CLUTCH OF THE SEWING MACHINE

Authors

  • Firuza Dustova Tashkent Institute of Textile and Light Industry
  • Sabit Babadjanov Tashkent Institute of Textile and Light Industry

Keywords:

friction clutch, shaft, slinding, friction forces, coupling half, belt drive, wear resistance, heat resistance, adhesion, cohesion, friction moment, friction coefficient

Abstract

The article considers a disc friction clutch, a sewing machine drive, the condition for its performance, the
calculation of axial force, and the wear resistance of a friction pair. In the process of switching on the friction clutch, sliding occurs
between the parts with which the clutch halves are engaged. It is noted that the adhesion strength in the clutch depends on the
coefficient of friction and its stability when changing the sliding speed, pressure and temperature.

Downloads

Published

2023-03-31

How to Cite

Dustova, F., & Babadjanov, S. (2023). CALCULATION OF THE LOAD ON THE FRICTION CLUTCH OF THE SEWING MACHINE. Scientific and Technical Journal of Namangan Institute of Engineering and Technology, 8(1), 174–179. Retrieved from http://niet.uz/index.php/nj/article/view/115

Issue

Vol. 8 No. 1 (2023): Scientific and Technical Journal of Namangan Institute of Engineering and Technology

Section

Articles