COMPOSITIONAL ANALYSIS OF RAW MATERIALS IN SORBENT PRODUCTION

COMPOSITIONAL ANALYSIS OF RAW MATERIALS IN SORBENT PRODUCTION

Авторы

  • Zilola Nomonova Namangan State Technical University
  • Dilnoza Jumayeva Institute of general and inorganic chemistry AS of RUz
  • Kunkhoja Zaripbaev Institute of general and inorganic chemistry AS of RUz
  • Zuxriddin Oxunjonov Fergana State Technical University

DOI:

https://doi.org/10.61151/stjniet.v10i3.867

Ключевые слова:

acetylene soot, chemical activation, hydrochloric acid, sodium hydroxide, chemical composition, elemental content, oxide content

Аннотация

This article presents the results of obtaining an adsorbent based on carbon-containing soot waste through chemical activation using hydrochloric acid and sodium hydroxide. As a result, improvements were achieved in the compositional purity of the material and its sorption properties. Data are presented on the elemental and oxide composition of the waste after chemical activation, which enables a reduction in reagent consumption and the removal of harmful compounds prior to subsequent activation stages. The analytical characteristics of the resulting sorption-active adsorbent are substantiated.

Загрузки

Опубликован

2025-09-30

Как цитировать

Nomonova, Z., Jumayeva, D., Zaripbaev, K., & Oxunjonov, Z. (2025). COMPOSITIONAL ANALYSIS OF RAW MATERIALS IN SORBENT PRODUCTION. Scientific and Technical Journal of Namangan Institute of Engineering and Technology, 10(3), 135–144. https://doi.org/10.61151/stjniet.v10i3.867

Выпуск

Том 10 № 3 (2025): Scientific and Technical Journal Namangan Institute of Engineering and Technology

Раздел

Articles