RESULTS OF IMPROVING THE CONSTRUCTION OF THE PLATE HEAT EXCHANGE

RESULTS OF IMPROVING THE CONSTRUCTION OF THE PLATE HEAT EXCHANGE

Авторы

  • Odiljon Mallabayev Namangan institute of engineering and technology
  • Nadira Yusupova Institute of general and inorganic chemistry AS of RUz
  • Nurlan Sarsenbayev Karakalpak State University named after Berdakh

DOI:

https://doi.org/10.61151/stjniet.v10i3.866

Ключевые слова:

plate heat exchanger, heat exchange, turbulence, channel geometry, heat transfer coefficient

Аннотация

The article examines modern methods of intensifying heat exchange in plate heat exchangers by changing the geometry of channels. The effectiveness of corrugated, chevron, and zigzag structures in reducing flow resistance and increasing the heat transfer coefficient has been substantiated. The peculiarities of the influence of the slope angle of the plate relief on the turbulence of the flow and the formation of stagnant zones are analyzed. Recommendations for choosing geometry are given, taking into account operating conditions in the gas processing industry.

Загрузки

Опубликован

2025-09-30

Как цитировать

Mallabayev, O., Yusupova, N., & Sarsenbayev, N. (2025). RESULTS OF IMPROVING THE CONSTRUCTION OF THE PLATE HEAT EXCHANGE. Scientific and Technical Journal of Namangan Institute of Engineering and Technology, 10(3), 130–134. https://doi.org/10.61151/stjniet.v10i3.866

Выпуск

Том 10 № 3 (2025): Scientific and Technical Journal Namangan Institute of Engineering and Technology

Раздел

Articles