STUDY ON DETERMINING THE BENDING AND TORSIONAL STIFFNESS OF PACKAGED WORKING BODIES

STUDY ON DETERMINING THE BENDING AND TORSIONAL STIFFNESS OF PACKAGED WORKING BODIES

Authors

  • MUTAKHKHIRKHON ABDUVAKHIDOV Namangan Institute of Engineering and Technology

DOI:

https://doi.org/10.61151/stjniet.v10i3.883

Keywords:

torsion performance, bending performance, package of alternating elements, longitudinal force, compression, disk element, flat element, working element, spacer element, torsional stiffness, phenomenological method

Abstract

The article reports on the study of bending and torsion of a package of alternating flat working and spacer disk elements, assembled by means of longitudinal compressive force. As a result, a phenomenological method for determining the bending and torsional stiffness of such structures is substantiated.

Downloads

Published

2025-09-30

How to Cite

ABDUVAKHIDOV, M. (2025). STUDY ON DETERMINING THE BENDING AND TORSIONAL STIFFNESS OF PACKAGED WORKING BODIES. Scientific and Technical Journal of Namangan Institute of Engineering and Technology, 10(3), 276–279. https://doi.org/10.61151/stjniet.v10i3.883

Issue

Vol. 10 No. 3 (2025): Scientific and Technical Journal Namangan Institute of Engineering and Technology

Section

Articles