COMPOSITIONAL ANALYSIS OF RAW MATERIALS IN SORBENT PRODUCTION

COMPOSITIONAL ANALYSIS OF RAW MATERIALS IN SORBENT PRODUCTION

Authors

  • Zilola Nomonova Namangan State Technical University
  • Jumayeva Dilnoza Institute of general and inorganic chemistry AS of RUz
  • Zaripbaev Kunkhoja Institute of general and inorganic chemistry AS of RUz
  • Oxunjonov Zuxriddin Fergana State Technical University

DOI:

https://doi.org/10.61151/stjniet.v10i3.867

Keywords:

acetylene soot, chemical activation, hydrochloric acid, sodium hydroxide, chemical composition, elemental content, oxide content

Abstract

This article presents the results of obtaining an adsorbent based on carbon-containing soot waste through chemical activation using hydrochloric acid and sodium hydroxide. As a result, improvements were achieved in the compositional purity of the material and its sorption properties. Data are presented on the elemental and oxide composition of the waste after chemical activation, which enables a reduction in reagent consumption and the removal of harmful compounds prior to subsequent activation stages. The analytical characteristics of the resulting sorption-active adsorbent are substantiated.

Downloads

Published

2025-09-30

How to Cite

Nomonova, Z., Jumayeva, D., Zaripbaev, K., & Oxunjonov, Z. (2025). COMPOSITIONAL ANALYSIS OF RAW MATERIALS IN SORBENT PRODUCTION. Scientific and Technical Journal of Namangan Institute of Engineering and Technology, 10(3), 135–144. https://doi.org/10.61151/stjniet.v10i3.867

Issue

Vol. 10 No. 3 (2025): Scientific and Technical Journal Namangan Institute of Engineering and Technology

Section

Articles