MODELING OF A VIBRATORY CLEANING DEVICE WITH COSINOSOIDAL AND SINUSOIDAL SHAPES IN MATCHING THE LONGITUDINAL AND TRANSVERSE CUTTING SURFACE

MODELING OF A VIBRATORY CLEANING DEVICE WITH COSINOSOIDAL AND SINUSOIDAL SHAPES IN MATCHING THE LONGITUDINAL AND TRANSVERSE CUTTING SURFACE

Authors

  • A’zam Mamaxonov Namangan Institute of Engineering and Technology
  • Khikmatillaev Ismoilkhon Namangan State Technical University

DOI:

https://doi.org/10.61151/stjniet.v10i4.939

Keywords:

Vibratory screen, spherical, banana screen, sinusoidal and cosinusoidal, chaotic motion, optimal parameters, amplitude, frequency, length, hole diameter, hole pitch, hole density

Abstract

This article analyzes scientific research conducted on vibratory cleaning devices. Based on the analysis, a new vibratory cleaning machine with longitudinal and transverse cross-sections of cosinusoidal and sinusoidal shape, respectively, is proposed. The motion law of cottonseeds on the screen surface was determined. Graphs were obtained showing the relationship between the longitudinal vibration amplitude and period of the screen surface and the cleaning efficiency.

Downloads

Published

2025-12-30

How to Cite

Mamaxonov, A., & Khikmatillaev, I. (2025). MODELING OF A VIBRATORY CLEANING DEVICE WITH COSINOSOIDAL AND SINUSOIDAL SHAPES IN MATCHING THE LONGITUDINAL AND TRANSVERSE CUTTING SURFACE. Scientific and Technical Journal of Namangan Institute of Engineering and Technology, 10(4), 227–238. https://doi.org/10.61151/stjniet.v10i4.939

Issue

Vol. 10 No. 4 (2025): Scientific and Technical Journal Namangan Institute of Engineering and Technology

Section

Articles