Vol. 8 No. 2 (2023): Scientific and Technical Journal of Namangan Institute of Engineering and Technology

A CREATION OF A NEW MODEL OF WOMEN'S COAT Сoat modeling

• 51-58

Practical and theoretical analysis of the results obtained in the process of cleaning cotton from impurities

• 67-73

THE PROCESSES OF GRADUAL MODERNIZATION OF THE STATE ADMINISTRATION SYSTEM IN UZBEKISTAN OVER THE YEARS OF INDEPENDENCE

• 278-286

667.024.8 Design of a resource-efficient chain drive structure for the device drive that distributes the seed in the bunker to the linters

• 237-243

CONTROL OF VIBRATION PARAMETERS ON THE TANK WALL OF OIL POWER TRANSFORMERS IN OPERATION

• 179-185

BINDING MATERIALS FOR CREATING COAL GRANULES AND THEIR COLLOID-CHEMICAL CHARACTERISTICS

• 146-152

STRЕSS-STRАIN STАTЕ ОF SОIL DАMS UNDЕR THЕ АСTIОN ОF STАTIС LОАDS

• 221-228

641.1/.3 Determining the effectiveness of soaking almond kernels before processing

• 97-101

FORECASTING THE PROSPECTIVE VOLUME OF CARGO TRANSPORTATION FOR THE DEVELOPMENT OF THE TRANSPORT NETWORK

• 253-260

ANALYSIS OF TECHNOLOGICAL PARAMETERS AND PHYSIC-MECHANICAL PROPERTIES OF INTERLOCK KNITTED FABRIC KNITTED FROM COTTON-NITRON YARN

• 32-37

UDK 664.34:637.144 INDICATORS OF BLENDING OF REFINED VEGETABLE OILS

• 87-91

ANALYSIS OF THE EFFECT OF ADHESIVE SUBSTANCES ON PAPER STRENGTH

• 134-137

DEVELOPMENT OF TECHNOLOGY TO INCORPORATE DEHYDRATED MURUNGA LEAF POWDER IN PANEER CHEESE

• 79-87

STUDY OF AERODYNAMIC CHARACTERISTICS OF COTTON FIBER IN SEPARATOR OF PNEUMO-MECHANICAL SPINNING MACHINE

• 14-18

ANALYSIS OF EXISTING METHODS AND APPROACHES TO THE ASSESSMENT OF RESIDUAL RESOURCES OF TRACTION ROLLING STOCK

• 243-248

687.1.001.02:675.042 МЎЙНАЛИ КИЙИМЛАРНИ МУҲИМ ОМИЛЛАРНИ ШАКЛЛАНТИРИШДА ИСТЕЪМОЛЧИЛАР ФИКРИНИ ТАДҚИҚ ҚИЛИШ МЎЙНАЛИ КИЙИМЛАРНИ МУҲИМ ОМИЛЛАРНИ ШАКЛЛАНТИРИШДА ИСТЕЪМОЛЧИЛАР ФИКРИНИ ТАДҚИҚ ҚИЛИШ

• 3-8

STUDY OF THE CATALYTIC SYNTHESIS OF O-VINYL ETHER BASED ON MONOETHANOLAMINE AND ACETYLENE

• 120-124

UDС: 004.4; 621.315.1 Microcontroller-based remote monitoring of overhead power lines

• 228-236

A ANALYSIS OF HEADWEAR AND BERET IN FASHION

• 42-51

METHODOLOGY FOR ASSESSING THE LEVEL OF TRAIN SAFETY

• 185-189

UDK 620.20 ANALYSIS OF SOLAR ENERGY DEVICES

• 205-212

SCIENTIFIC BASIS FOR THE PRODUCTION TECHNOLOGY OF FRUIT LOZENGES (marshmallow)

METHODOLOGY FOR ASSESMENT OF EXTERNAL FACTORS AFFECTING THE FINANCIAL SECURITY OF BUILDING MATERIALS INDUSTRY ENTERPRISES

• 293-298

678 Kimyo va kimyoviy texnologiyalar ADHESION OF A THERMOREACTIVE EPOXY WATERFUL EMULSION FILM FORMER ON METAL

• 102-107

FREQUENCY ADJUSTMENT OF WELL PUMPING EQUIPMENT

• 167-178

ANALYSIS OF OIL DUST RELEASED DURING PROCESSING OF METAL SURFACES UNDER LABORATORY CONDITIONS

• 152-158

UDK 338.12 FOURTH INDUSTRIAL REVOLUTION IN THE TEXTILE AND GARMENT MANUFACTURING

• 287-293

METHOD OF DESIGNING SPECIAL CLOTHING BASED ON APPROVAL OF CONTAMINATION ASSESSMENT METHODOLOGY

• 59-66

CONTROL OF STATIC AND DYNAMIC MODES OF ASYNCHRONOUS MOTOR OF FODDER GRINDING DEVICES

• 260-266

ANALYTICAL CALCULATION OF THE DEFORMATION STATE OF THE SAW GIN SAW TEETH BENDING UNDER THE ACTION OF A LOAD

• 23-31

UDK 661.183.2 TECHNOLOGICAL BASIS OF ACTIVATED CARBON PRODUCTION PROCESS THROUGH PROCESSING OF PLUM SEED WASTE

• 128-133

OPTIMIZATION OF HEATING OF MIXTURES OF OIL AND GAS CONDENSATE BY HOT FLOWS OF FRACTIONS IN TUBULAR HEAT EXCHANGERS

• 138-145

УДК 1082 SYSTEMATIC ANALYSIS OF THE STATE OF CONTROL OF THE TECHNOLOGICAL PROCESSES OF UNDERGROUND LEACHING

• 267-273

CHOOSING ACCEPTABLE PARAMETERS FOR EXPERIMENT ON NEW ENERGY-SAVING VACUUM SUBLIMATION DRYING EQUIPMENT

• 92-96

DETERMINATION OF THE FRICTION FORCE BETWEEN THE COMPOSITE FEEDING CYLINDER AND THE FIBER ROVE

• 249-253

STUDY OF TECHNOLOGICAL PARAMETERS AND PHYSICAL-MECHANICAL PROPERTIES OF RIB FABRIC KNITTED FROM SPINNING COTTON-NITRON YARN

• 38-42

UDC 687.1.001.02:675.042 LITERARY ANALYSIS NEW TECHNOLOGIES OF WOMEN'S OUTER CLOTHING FROM CARAKUL LITERARY ANALYSIS NEW TECHNOLOGIES OF WOMEN'S OUTER CLOTHING FROM CARAKUL

• 9-13

SOLUBILITY OF COMPONENTS IN THE SYSTEM NaClO3 CO(NH2)2-NH(C2H4OH)2 -H2O

• 124-128

620.92 DETERMINING COMPARATIVE EFFICIENCY IN COMPOSITE FILM SOLAR DRYERS Solar dryer

• 213-220

RESEARCH OF THE MOVEMENT OF FIBERS IN THE CONFUSION BETWEEN THE AIR CHANNEL AND THE ROTOR IN A PNEUMO-MECHANICAL SPINNING MACHINE

• 18-23

USE OF INTEGRATED TECHNOLOGIES IN VOCATIONAL EDUCATION

• 189-195

A ANALYSIS IN SOLIDWORKS SOFTWARE OF THE STRENGTHS GENERATED IN THE UNDERGROUND PART OF THE WAGONS AS A RESULT OF THE IMPACT OF FORCE ON THE ENTIRE WHEELS OF WAGONS

• 273-277

THERMOKINETICS OF WATER ADSORPTION IN ZEOLITE AGZSM-5

• 114-119

ANALYTICAL ANALYSIS OF THE OPTIMAL DIMENSIONS AND ENERGY PARAMETERS OF THE IMPELLER OF A NOZZLE HYDRAULIC TURBINE

• 196-205

678 Kimyo va kimyoviy texnologiyalar Synthesis of a Non-Isocyanate Urethane Oligomer Based on Phthalic Anhydride

• 107-113

STUDY OF FOAM FORMATION IN POLYMER SOLUTIONS DEPENDING ON THE CONTENT AND NATURE OF SURFACTANTS

• 159-166