IMPROVING THE QUALITY OF GINING ON PRODUCTS

IMPROVING THE QUALITY OF GINING ON PRODUCTS

Authors

  • Ravshan Abdullayev Namangan institute of engineering and technology

DOI:

https://doi.org/10.61151/stjniet.v9i1.410

Keywords:

raw cotton, fiber, joint, quality, gin machine, pneumomechanical gin, textiles

Abstract

Abstract: The ginning process depends on many factors, among which the main ones are the characteristics of the processed cotton, the rotation speed of the saw, and the geometric dimensions of the saw tooth. It is impossible to determine the quality of the fiber by the arc of saw teeth engaged on it and the fiber separated around the seed comb. It can only be determined after passing beyond the grate.

Downloads

Published

2024-03-30

How to Cite

Abdullayev, R. (2024). IMPROVING THE QUALITY OF GINING ON PRODUCTS. Scientific and Technical Journal of Namangan Institute of Engineering and Technology, 9(1), 208–211. https://doi.org/10.61151/stjniet.v9i1.410

Issue

Vol. 9 No. 1 (2024): Scientific and Technical Journal of Namangan Institute of Engineering and Technology

Section

Articles